Roofing tear-offs are messy and heavy. Old shingles, underlayment, flashing, and nails add up fast. A dump trailer lets Collin County and DFW crews load at the jobsite, haul to the dump, and unload with the hydraulic dump—without waiting on a roll-off swap for every run.
This page is about sizing and loading for roofing debris. For empty weight vs GVWR details, use the companion guide: How much does a dump trailer weigh?.
Why roofers rent a dump trailer
- Multiple dump runs in one day when the tear-off is big
- Hydraulic unload instead of shoveling out a box
- Sides that help contain shingles and scrap
- Control over when you leave the site
Pickup trucks alone usually mean too many trips. A stationary dumpster works for some jobs; a dump trailer is often better when you already have a capable tow vehicle and need flexibility.
5×10 vs 7×14 for roofing (job-size guidance)
AMD’s McKinney dump fleet includes both sizes:
| Unit | When roofers often choose it | Verified notes |
|---|---|---|
| 5×10 Big Tex dump | Partial tear-offs, smaller roofs, tight driveways | Dual 3,500 lb axles; 2-5/16″ hitch; Power Up / Gravity Down |
| 7×14 Texas Pride dump | Full re-roofs, heavier debris volume, contractor pace | 7′×14′×4′; GVWR 14,000 lbs; dual 7,000 lb axles; 2-5/16″ hitch |
Size up when the job is a full tear-off or wet/stacked shingles. Volume that “looks like it fits” in a small dump can still exceed safe weight. AMD does not list empty weight or payload pounds on these inventory pages—confirm the unit on your reservation and watch the load.
Do not treat any blog “8,000–10,000 lb payload” line as a guarantee. Calculate from GVWR − empty weight on the trailer you actually get. See the dump weight guide.
Loading roofing debris safely
- Keep weight as even as you can; avoid a rear-heavy pile that lifts the tongue.
- Watch nails and sharp scrap—they belong in the box, not on the driveway.
- Tarping may be required by the landfill or for highway travel—ask what AMD includes when you book.
- Stop loading when you hit weight limits, even if the sides are not full.
- Confirm your truck’s tow rating against a loaded 7×14 (14,000 lb GVWR class).
Jobsite vs McKinney yard
You load at the roof job. You pick up and return the trailer at the McKinney yard unless another arrangement is confirmed on your reservation.
- Yard: 5168 Baxter Well Rd, McKinney, TX 75071
- Access: 24 hours / 7 days (yard access, not emergency staffing)
- Allen (115 Richardson Ct Ste TR): admin office only—no trailer pickup
Crews working Collin, Dallas, and nearby suburbs typically stage from McKinney, not Allen.
Cost snapshot for planning
Live listed rates (confirm when booking):
- 5×10: $100/day, $550/week
- 7×14: $150/day, $950/week
More context: How much does it cost to rent a dump trailer?.
Reserve a dump for a roofing job
Reserve online or call (469) 972-8824. Tell us roof size and debris type so we can point you to the right dump. Pickup in McKinney—24/7 yard access.
FAQ
Is a 5×10 enough for a full roof tear-off? Sometimes for a small roof or multiple trips. Many full tear-offs are easier with the 7×14. Match volume and weight.
What hitch do AMD dumps use? Both listed dumps show a 2-5/16 inch hitch.
Where is pickup? 5168 Baxter Well Rd, McKinney. Not Allen.
Where do I read weight ratings? Dump trailer weight guide plus the sticker on your reserved unit.